voltage standing wave ratio मीनिंग इन हिंदी

उदाहरण वाक्य

1. Slotted lines are primarily intended for measurement of the voltage standing wave ratio on the line.
2. Further specifications are the LNA's operating bandwidth, gain flatness, stability, input and output voltage standing wave ratio ( VSWR ).
3. The term " power standing wave ratio " ( PSWR ) is sometimes referred to, and defined as the square of the voltage standing wave ratio.
4. An impedance mismatch can be also quantified with the standing wave ratio ( SWR or VSWR for voltage ), which is connected to the impedance ratio and reflection coefficient by : VSWR = \ frac { | V | _ { max } } { | V | _ { min } } = \ frac { 1 + | \ Gamma | } { 1-| \ Gamma | }, where \ left | V \ right | _ { min, max } are the minimum and maximum values of the voltage absolute value, and the VSWR is the voltage standing wave ratio, which value of 1 denotes full transmission, without reflection and thus no standing wave, while very large values mean high reflection and standing wave pattern.